Solar Power Panel Controller USB DC Type-C Charger

• After-sales Service: Yes
• Warranty: 3 Years
• Condition: New
• Certification: API, ISO, CB, CE
• Application: Collector Controller, Solar System Controller, Charger Controller, Lighting Controller, Wind Controller, Solar Working Station, Voltage Controller, Thermal Controller
• Rated Voltage: 5V,9V,12V,15V,18V,18V
• Model NO.: JS-DT2U01 (USB+QC3.0+Type-C+DC)
• Input Voltage: 5V-28V DC
• Output: Type-C: Pd3.0, 60W 5V3a,9V3a,12V3a,15V3a, 20V3a
• Battery Protection: Charging and Discharging
• Charging Status: LED Indication
• Work Method: DC
• Life-Time: More Than 8 Years
• Transport Package: Color Box
• Specification: CE, ROHS
• Trademark: JUST
• Origin: Shenzhen
• HS Code: 853710909
• Production Capacity: 10000PCS/Month

Product Description

Product name: USB/QC3.0/TYPE-C/DC OUTPUT CONTROLLER
Item no.: JS-DT2U01 (USB+QC3.0+Type-C+DC)

Specification:
Size:85*51*14mm
Input voltage:DC 6-28V
Output:DC5521,6A(max),20A Anti-charge diode;
Type-C: PD3.0, 60W 5V3A,9V3A,12V3A,20V3A;
USB(QC3.0):18W,5V3A,9V2A,12V1.5A;                          
USB:5V3A;
Protocol support:BC1.2,Apple,Samsung, QC2.0, QC3.0
Work Indicator:red indicator;                                                        
Solar panel power suggestion: <120W

  

Reference photos:




The product is used to control Solar Panel and battery in Solar System automatically.
Here is the Solar Panel Configuration list with different rated voltage (12V and 6V)
. FUCTION:
  1. Over-load protection
  2. Short circuit protection
  3. Reverse discharging protection
  4. Reverse-polarity protection
  5. Over-charging protection
. CONNECTION (AS INDICATED IN DIAGRAM):
Open the top cover of controller and connect the wire with terminals follow the diagram on the top cover of it.
1. Connect the "+", "-" Poles of the battery to the corresponding ports of controller (the third and the fourth one from left).
* Load indicator (load) flash once and after 15 seconds will light up, said connected correctly, can proceed the following connection. Otherwise it will damage the controller.
2. Connect the "+", "-" poles of the solar panel to the corresponding ports of controller (the first and the second one from left).
* If a connection error can damage your controller.
3. Connect the "+", "-" poles of the load to the corresponding ports of controller (the fifth and the sixth one from left).
. INDICATOR LED
1. Charge LED is used to indicate the charging status of battery. Lighting is in-charging mode, flickering is floating charge mode. LED turn off means charging stopped.
2. There is output and load can work if the Load LED is lighting. There isn't output and the load cannot work if Load LED off.
Notice:
1. Please make sure the rated voltage of solar panels, batteries the loads are the same. All of them should be 6V,12V,24V,48V,72V,96V,216V.
2. The rated current of solar panels and load must be less than the rated current of controller.
The specifications: Error of 2%  
Parameters may customized by customers